home *** CD-ROM | disk | FTP | other *** search
INI File | 2005-08-15 | 12.9 KB | 271 lines |
- ;*****************************************************************************
- ;
- ; Name: w600mdm2.inf
- ;
- ; Function:
- ; Install the Sony Ericsson W600 USB WMC Modem Drivers on Win2000/XP
- ;
- ; Copyright (c) 1997-2005 MCCI
- ;
- ; MCCI is a registered trademark of Moore Computer Consultants, Inc
- ;
- ; NOTICE: This software is licensed, not sold. Any modification of this
- ; inf file to change the reference to an operating system or to change the
- ; reference to a device is not permitted unless authorized in writing by
- ; Moore Computer Consultants, Inc.
- ;
- ;*****************************************************************************
-
- [Version]
- signature="$WINDOWS NT$"
- Class=Modem
- ClassGuid={4d36e96d-e325-11ce-bfc1-08002be10318}
- Provider=%Provider%
- DriverVer=07/18/2005, 4.34.0.2703
- CatalogFile=w600mdm.cat
-
- [ControlFlags]
- ExcludeFromSelect = *
-
- [SourceDisksNames]
- ; diskid = description[, [tagfile] [, <unused>, subdir]]
- 1=%DiskString%,"w600mdm.sys",,
-
- [SourceDisksFiles]
- ; filename = diskid[,[ subdir][, size]]
- w600mdm.sys = 1
- w600cmnt.sys = 1
- w600mdfl.sys = 1
-
- ;-----------------------------------------------------------------------------
- ; Specify target paths...
- ;-----------------------------------------------------------------------------
-
- [DestinationDirs]
- DefaultDestDir = 12 ; system32\drivers
-
- ;-----------------------------------------------------------------------------
- ; Table of Contents
- ;-----------------------------------------------------------------------------
- [Manufacturer]
- %Sony Ericsson%=SEMC
-
- ;-----------------------------------------------------------------------------
- ; Device-by-device entries
- ;-----------------------------------------------------------------------------
- [SEMC]
- %SEMC.Modem.Desc% = SEMC.Install, USB\VID_0FCE&PID_D032&MI_01&OS_NT
- %SEMC.Modem.Desc2% = SEMC.Install, USB\VID_0FCE&PID_D032&MI_03&OS_NT
-
- ;-----------------------------------------------------------------------------
- ; Installation instructions
- ;-----------------------------------------------------------------------------
-
- [SEMC.Install.nt]
- AddReg = SEMC.AddReg, SEMC.NT.AddReg, GenericAddReg, USB
- CopyFiles = CopyFiles, CopyFiles.Win2K
-
-
- ;-----------------------------------------------------------------------------
- ; Registry
- ;-----------------------------------------------------------------------------
-
- ; common registry entries
- [SEMC.AddReg]
- HKR,,NTMPDriver,,w600mdm.sys
- HKR,,OverrideDefaultPortSettings, 0x10001, 01,00,00,00
- HKR,,InitialBaudRate, 0x10001, 00,C2,01,00 ;115200 initial baud rate
- HKR,,InitialLineControl,, "8N1" ;8-bits, No parity, 1 stop bit
- HKR,,EnableSetClearFeatureIdle, 0x10001, 01,00,00,00
-
- ; only for NT...
- [SEMC.NT.AddReg]
- HKR,,AllowSuspendWhileOpen, 0x10001, 01,00,00,00
-
- ;-----------------------------------------------------------------------------
- ; Copy lists
- ;-----------------------------------------------------------------------------
- [CopyFiles]
-
- [CopyFiles.Win2K]
- w600mdm.sys
- w600cm.sys,w600cmnt.sys
- w600cmnt.sys
- w600mdfl.sys
-
-
-
- ;-----------------------------------------------------------------------------
- ; NT Services installation
- ;-----------------------------------------------------------------------------
- [SEMC.Install.NT.HW]
- AddReg = LowerFilterAddReg
- AddReg = UpperFilterAddReg
-
- [SEMC.Install.NT.Services]
- AddService = w600mdm, 0x00000000, SEMC.Install.AddService
- AddService = w600mdfl,, SEMC.Install.AddFilter
-
- [UpperFilterAddReg]
- HKR,,"UpperFilters",0x00010000,"w600mdfl"
-
- [SEMC.Install.AddService]
- DisplayName = %SEMC.Service.Name%
- Description = %SEMC.Service.Desc%
- ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
- StartType = 3 ;%SERVICE_DEMAND_START%
- ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
- ServiceBinary = %12%\w600mdm.sys
-
- [SEMC.Install.AddFilter]
- DisplayName = %SEMC.Filter.Name%
- Description = %SEMC.Filter.Desc%
- ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
- StartType = 3 ;%SERVICE_DEMAND_START%
- ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
- ServiceBinary = %12%\w600mdfl.sys
-
- [LowerFilterAddReg]
- HKR,,"LowerFilters",0x00010000,"w600mdm"
-
- [GenericAddReg]
- HKR,, FriendlyDriver,,unimodem.vxd
- HKR,, PortSubClass,1, 02
- HKR,, ConfigDialog,, modemui.dll
- HKR,, EnumPropPages,, "modemui.dll,EnumPropPages"
- HKR,, FClass, 1, c3,00,00,00
- HKR,,Properties, 1, 00,00,00,00, FF,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 01,00,00,00, 00,c2,01,00, 80,70,00,00
- HKR,, DCB, 1, 1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
- ;HKR,, VoiceProfile, 1,23,22,09,00
- HKR, Fax, CL1FCS,, "2"
-
- HKR, Init, 1,, "AT<cr>"
- HKR, Init, 2,, "AT &F<cr>"
- HKR, Init, 3,, "AT V1E0S0=0&D2&C1<cr>"
- HKR, Init, 4,, "AT +CMEE=1<cr>"
- HKR, Monitor, 1,, "ATS0=0<cr>"
- HKR, Monitor, 2,, "None"
- HKR, Answer, 1,, "ATA<cr>"
- HKR, Hangup, 1,, "ATH<cr>"
- HKR,, Reset,, "AT&F<cr>"
- HKR, Settings, Compression_Off,, "+DS=0;"
- HKR, Settings, Compression_On,, "+DS=3,0,2048,32;"
- HKR, Settings, CompatibilityFlags, 1, 01 ,00 ,00, 00
- HKR, Settings, CallSetupFailTimer,, "S7=<#>;"
- HKR, Settings, DialPrefix,, "D"
- HKR, Settings, DialSuffix,, ";"
- HKR, Settings, Prefix,, "AT"
- HKR, Settings, Terminator,, "<cr>"
-
-
- ; DTE/DCE speeds will not be exact for generic modems because we will
- ; treat CONNECT ### as a DCE speed when some modems will report it as DTE.
- HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00 ; OK - Command executed
- HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00 ; CONNECT - Connection
- HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00 ; RING - Ring signal indicated
- HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00 ; NO CARRIER
- HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; ERROR - Invalid command
- HKR, Responses, "5<cr>", 1, 02, 00, B0,04,00,00, 00,00,00,00 ; CONNECT 1200
- HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00 ; NO DIALTONE - No dial tone detected
- HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00 ; BUSY - Engaged (busy) signal
- HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00 ; NO ANSWER
-
- HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>NO DIAL TONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>", 1, 02, 00, 60,09,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>", 1, 02, 00, C0,12,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>", 1, 02, 00, 80,25,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 14400<cr><lf>", 1, 02, 00, 40,38,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>", 1, 02, 00, 00,4B,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 28800<cr><lf>", 1, 02, 00, 80,70,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 33600<cr><lf>", 1, 02, 00, 40,83,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>", 1, 02, 00, 00,96,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1, 02, 00, 00,e1,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1, 02, 00, 00,c2,01,00, 00,00,00,00
- HKR, Responses, "<cr><lf>FAX<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>DATA<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>VOICE<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>RINGING<cr><lf>", 1, 01, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>DELAYED<cr><lf>", 1, 1D, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>DELAYED NUMBER<cr><lf>", 1, 1D, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>BLACKLISTED<cr><lf>", 1, 1C, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>BLACKLISTED NUMBER<cr><lf>", 1, 1C, 00, 00,00,00,00, 00,00,00,00
- HKR, Responses, "<cr><lf>+FCERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
-
- HKR, Responses, "<cr><lf>+CME ERROR: 0<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Phone failure.
- HKR, Responses, "<cr><lf>+CME ERROR: 1<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; No connection to phone.
- HKR, Responses, "<cr><lf>+CME ERROR: 2<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Phone modem link reserved.
- HKR, Responses, "<cr><lf>+CME ERROR: 3<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Operation not permitted.
- HKR, Responses, "<cr><lf>+CME ERROR: 4<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Operation not supported.
- HKR, Responses, "<cr><lf>+CME ERROR: 5<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-SIM card PIN required.
- HKR, Responses, "<cr><lf>+CME ERROR: 6<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-FSIM PIN required
- HKR, Responses, "<cr><lf>+CME ERROR: 7<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; PH-FSIM PUK required
- HKR, Responses, "<cr><lf>+CME ERROR: 10<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card not inserted.
- HKR, Responses, "<cr><lf>+CME ERROR: 11<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card PIN required.
- HKR, Responses, "<cr><lf>+CME ERROR: 12<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card PUK required.
- HKR, Responses, "<cr><lf>+CME ERROR: 13<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card failure.
- HKR, Responses, "<cr><lf>+CME ERROR: 14<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card busy.
- HKR, Responses, "<cr><lf>+CME ERROR: 15<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; SIM card wrong.
- HKR, Responses, "<cr><lf>+CME ERROR: 16<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Incorrect password.
- HKR, Responses, "<cr><lf>+CME ERROR: 20<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Memory full.
- HKR, Responses, "<cr><lf>+CME ERROR: 21<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid index.
- HKR, Responses, "<cr><lf>+CME ERROR: 22<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Not found.
- HKR, Responses, "<cr><lf>+CME ERROR: 23<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Memory failure.
- HKR, Responses, "<cr><lf>+CME ERROR: 24<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Text string too long.
- HKR, Responses, "<cr><lf>+CME ERROR: 25<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid character in text string.
- HKR, Responses, "<cr><lf>+CME ERROR: 26<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Dial string too long.
- HKR, Responses, "<cr><lf>+CME ERROR: 27<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Invalid character in dial string.
- HKR, Responses, "<cr><lf>+CME ERROR: 30<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; No network service
- HKR, Responses, "<cr><lf>+CME ERROR: 31<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Network timeout
- HKR, Responses, "<cr><lf>+CME ERROR: 100<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; Unknown.
- HKR, Responses, "<cr><lf>+CMS ERROR: ", 1, 03, 00, 00,00,00,00, 00,00,00,00 ; CMS errors
-
-
- [USB]
- HKR,, PortDriver, 0, wdmmdmld.vxd
- HKR,, DeviceType, 1, 01
-
-
- ;-----------------------------------------------------------------------------
- ; STRINGS
- ;-----------------------------------------------------------------------------
- [Strings]
-
- ;<<localize the following>>
-
- ;BEGIN ENG - US English Strings
-
- Provider = "Sony Ericsson"
- Sony Ericsson = "Sony Ericsson"
- DiskString = "Sony Ericsson W600 USB WMC Modem installation disk"
-
- SEMC.Modem.Desc = "Sony Ericsson W600 USB WMC Data Modem"
- SEMC.Service.Name = "Sony Ericsson W600 USB WMC Modem Drivers"
- SEMC.Service.Desc = "Sony Ericsson W600 USB WMC Modem Drivers"
-
- SEMC.Filter.Name = "Sony Ericsson W600 USB WMC Modem Filter"
- SEMC.Filter.Desc = "Sony Ericsson W600 USB WMC Modem Filter"
-
- CustomerDataPath = "Sony Ericsson W600"
- DriverSet = "Sony Ericsson W600 Software"
- UninstallFile = "W600Uninstall.exe"
- McciOptions = "Uninstallable"
-
- SEMC.Modem.Desc2 = "Sony Ericsson W600 USB WMC Modem"
-
- ;END ENG - US English Strings
-
- ;-----------------------------------------------------------------------------
- ; The following are symbolic constants which don't change per locale.
- ;-----------------------------------------------------------------------------
-
-
- ;*** end of file ***
-